Vend Again

160ml approx. (standard drinks), 240ml approx. (cappuccino)

240ml (minimum)

Between 28 and 32s (standard drinks), Between 70 and 80s (cappuccino)

6 minutes

2.5 litres

24

19.5 kg (standard brewer), 20.25 (pay brewer)

Brewer:

332mm wide x 480mm deep x 470mm high Note: The depth of the brewer is 515mm with the mains supply connected. A gap of 60mm is needed behind the plumbed brewer for the mains water supply pipework.

Filterpack Unit:

346mm wide x 410mm deep x 470mm high, 12 selections and 276 drinks

Additional Module:

85mm wide x 410mm deep x 470mm high, 3 selections and 69 drinks

Ancillaries Unit:

105mm wide x 410mm deep x 470mm high

Cup Holder:

110mm wide x 410mm deep x 45mm high, capacity of 150 cups

Complete System:

900mm wide x 480mm deep x 470mm high
Brewer, 12 selection Filterpack unit, ancillaries unit, cup holder.

Base Cabinet:

730mm wide x 620mm deep x 900mm high
9 selection Filterpack unit for use with base cabinets has 207 drinks capacity.

13 in. wide x 17.75 in. deep x 11 in. high

Plumbed:

Mains drinking water supply requirements:
Dynamic water pressure of 1 to 7 bar (15 to 100 psi)
Flow rate of at least 2 litres per minute
Water to be cold and sodium free
BS1010 15mm stopcock within 1 metre of brewer

Unplumbed:

Cold water is poured into the brewer by hand.
Tank capacity is 7.6 litres.

230V, 50 Hz, maximum 5 amps
Mains lead 2 metres long

1100 W Boiling mode, 75W Standby mode

(Pay brewer only)
Accepts: 1p, 2p, 5p, 10p, 20p, 50p, £1, £2 coins and FLAVIA^®® token.
No change given
Key operated free/pay switch